Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid in a Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Antifreeze coolant

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the coolant in a Ford Fiesta by following the instructions below. First, open the bonnet of your car and start by removing the cap from the coolant reservoir; then lift the vehicle and unscrew the drain plug from the radiator, allowing all the fluid to drain into a container.

At this point, screw the drain plug back in and top up the coolant with the correct type for your radiator, filling it to the maximum level mark!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Replacing the Coolant in a Ford Fiesta Radiator
Replacing the Coolant in a Ford Fiesta Radiator
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Let's look at the removal and replacement of the coolant in a Ford Fiesta radiator. Disconnect the radiator hose at the bottom using a socket wrench …
How to Remove the Radiator from a Ford Fiesta
How to Remove the Radiator from a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Want to remove the radiator from a Ford Fiesta? Follow these steps. Lift the bonnet and secure it. After removing the bumper and grille, start by dis…
How to Replace the Radiator Hose on Ford Fiesta 1.4i 16V
How to Replace the Radiator Hose on Ford Fiesta 1.4i 16V
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video, you will find instructions to remove and replace the radiator coolant hose on a Ford Fiesta 1.4i 16 valve, from 2002 to 2008. First, o…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos