Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal Instructions

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Front bumper

See other generations:
Video tutorial

Before proceeding with the disassembly operations, it is advisable to lift the vehicle on suitable axle stands or on a hydraulic lift to remove the front wheels and have more space to manoeuvre. To remove the front bumper, start by opening the front bonnet and removing the push clips (pull out the central pin and then the clip) and the screws (three) along the upper edge of the bumper, corresponding to the grille.

Then remove the front wheels and take out the clips along the edge of the wheel arch; remove the other clips and screws along the entire lower edge of the bumper; once the lower cover is removed, disconnect the fog light connectors and the temperature sensor connector.

Move the wheel arch liner to unscrew the screws fixing the bumper to the bracket under the wing.

Pull the bumper forward.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper of the Ford Mondeo
Removing the Front Bumper of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Below are the instructions for removing and replacing the front bumper of the Ford Mondeo. First, open the bonnet of the vehicle and start unscrewing…
Removing the Front Bumper on the Ford Mondeo
Removing the Front Bumper on the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the front bumper on the Ford Mondeo? Remove the front headlights and the central grille before taking off the front bumper. After removing t…
Removing Bumper of a Ford Mondeo
Removing Bumper of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Need to remove the front bumper of the Ford Mondeo? Here's how to do it from the front of the car. Lift the bonnet and secure it. Remove the retainin…

Other guides you may be interested in

How to Replace the Battery in a BMW 2 Series Active Tourer?

To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, just below the windshield on the driver's side, you will find a panel to remove. The battery is located under this panel and can be removed by loosening the screws that secure it and disconnecting the power cables; this will allow you to connect and install the new battery to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos