Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt and Tensioner on the Ford Transit TDDi

Model: Ford Transit MK 6 - Years 2000-2006
Part: V-belt

In this brief and simple guide, follow the steps to remove and replace the auxiliary belt and tensioner on the Ford Transit TDDi. First, open the bonnet of your vehicle and begin to loosen the tensioner using a socket or spanner; then, unscrew the bolts of the tensioner to remove it and replace it with the new one, as shown in the video. At this point, install the auxiliary belt correctly around the various pulleys in the correct direction, following the video tutorial to the end for reassembly!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Auxiliary Belt on Ford Transit 2.0 Ecoblue
Replacing Auxiliary Belt on Ford Transit 2.0 Ecoblue
Ford Transit (2014-2024 / MK 8) In this video guide, you will learn how to remove and replace the auxiliary belt on a Ford Transit 2.0 Ecoblue. First, lift the vehicle and remove th…
How to Replace the Auxiliary Belt on a Ford Transit Van?
How to Replace the Auxiliary Belt on a Ford Transit Van?
Ford Transit (1994-2000 / MK 5) In this tutorial, you will see how to replace the auxiliary belt on a Ford Transit van, a very simple and quick operation. First, ensure that the eng…
How to replace the timing belt of the Ford Transit
How to replace the timing belt of the Ford Transit
Ford Transit (2006-2014 / MK 7) Replacing the timing belt on a Ford Transit vehicle is a fairly simple operation to perform. To carry out this operation, we must first open the hood…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos