Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing and replacing the thermostat

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Thermostat
Operation: Removing and replacing the thermostat

This video shows us how to remove and replace the thermostat on our car. First we need to disconnect the negative pole of the battery; then it will be necessary to raise the car with the help of a jack as we have to remove all the coolant. To remove the coolant it will be necessary to unscrew the drain plug on the radiator; once all the liquid has been removed, we can remove the expansion tank. Then you need to find where the thermostat is located, just follow the coolant pipes and once you get to the thermostat you will need to disconnect them. Finally we proceed to remove the old thermostat and install the new one.


Posted on 1 August 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Focus 2018-2025 - What to do if the Ford Focus has a problem with the outside temperature sensor? Read Answer
    • Focus 2004-2011 - Where is the thermostatic valve of the Ford Focus 1.8 tdci? Read Answer
    • Focus 1998-2004 - Where is the thermostatic valve of the Ford Focus 1600? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos