Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Ford Endeavour

Model: Ford Endeavour MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

If you need to replace the cabin air filter on this vehicle, the images in this video and the description below will help you with the necessary steps. First, access the cabin from the passenger side and open the glove compartment.

Then, unclip the side support pins so you can fully swing it down. Behind the glove compartment, you will find the filter housing, which is protected by a plastic cover that you need to remove by pulling it towards you. Next, pull out the old filter and place the new one in. Press the cover back on, lift, and finally reattach the glove compartment.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Replace the Engine Oil and Oil Filter in the Ford Endeavour 2.2 Diesel
Replace the Engine Oil and Oil Filter in the Ford Endeavour 2.2 Diesel
Ford Endeavour (2016-2023 / MK 2) Today, we will go through the steps to perform the routine maintenance service by replacing the engine oil and oil filter in the Ford Endeavour 2.2 D…
How to Install Electric Running Boards on the Ford Endeavour
How to Install Electric Running Boards on the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) In this video, we show you how to install electric running boards on the Ford Endeavour. Installing electric running boards on the Ford Endeavour may…
How to Replace the Windshield of a Ford Endeavour
How to Replace the Windshield of a Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) This guide provides the main instructions on how to remove and replace the front windshield of a Ford Endeavour. First, get inside the vehicle and st…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos