Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Engine Oil and Oil Filter in the Ford Endeavour 2.2 Diesel

Model: Ford Endeavour MK 2 - Years 2016-2023
Part: Engine oil

Today, we will go through the steps to perform the routine maintenance service by replacing the engine oil and oil filter in the Ford Endeavour 2.2 Diesel. First, lift the vehicle and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then locate the oil filter, using a socket wrench to unscrew and remove it as shown in the video. Next, replace the filter cartridge with a new one, also replacing the gasket; finally, top off the oil!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Ford Endeavour?
How to Reset the Oil Light on a Ford Endeavour?
Ford Endeavour (2016-2023 / MK 2) The oil light on the Ford Endeavour can be reset without professional diagnostic tools. This is easily done through the onboard computer menu, and th…
How to reset the service light on the Ford Endeavour 2
How to reset the service light on the Ford Endeavour 2
Ford Endeavour (2016-2023 / MK 2) If you want to discover how to manually reset the service light on the display of the instrument panel of your second series Ford Endeavour, just rea…
How to Install Electric Running Boards on the Ford Endeavour
How to Install Electric Running Boards on the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) In this video, we show you how to install electric running boards on the Ford Endeavour. Installing electric running boards on the Ford Endeavour may…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos