Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Inflate and Repair Kit Works in the Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tires

See other generations:
Video tutorial

In today's video, you will see how the inflate and repair kit works in the Ford Fiesta; this also applies to other models from the American manufacturer. Open the boot and lift the base.

Then, extract the complete kit. Connect the compressor to the tyre valve and the 12-volt socket of the vehicle; it is advisable to work with the engine running to avoid draining the battery. Once done, having set the correct pressure, disconnect everything and replace the valve cap. Remember to drive for a maximum of 80 miles at 50 mph to avoid further issues.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Unlock and Repair the Seat Handle on the Ford Fiesta
How to Unlock and Repair the Seat Handle on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video tutorial, unlock and repair the front seat handle on the Ford Fiesta in simple and quick steps. First, open the front door and start re…
How to repair the rear seat backrest handle of the Ford Fiesta
How to repair the rear seat backrest handle of the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this guide, we will see the instructions that will allow us to repair the rear seat folding handle of the Ford Fiesta. First of all, we open the r…
How to Repair the Tailgate on the Ford Fiesta MK5
How to Repair the Tailgate on the Ford Fiesta MK5
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video, see how to repair the tailgate on the Ford Fiesta MK5: to open the motor, use a utility knife, sliding the blade several times between…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Why are the tire sensors not being detected on the Ford Fiesta? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos