Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery of the new Ford Edge

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Key

If you want to replace the key battery of your new Ford Edge all you have to do is practice the following steps. The whole procedure takes a few seconds and you will have no difficulty. First, locate the button located on the upper part of the cover and press it so as to be able to completely remove the physical emergency key. Immediately afterwards, use the same key to remove the cover and thus have access to the exhausted battery. Remove the latter with the help of a small flat screwdriver and replace it with a new one (CR2450).

Posted on 9 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Ford Edge remote control battery?
How to replace the Ford Edge remote control battery?
Ford Edge (2006-2014 / U387, MK 1) In this tutorial we can see how to replace the Ford Edge remote control battery, an extremely simple and economical operation. To do this, we will on…
How to replace the battery of the Ford Edge key.
How to replace the battery of the Ford Edge key.
Ford Edge (2015-2024 / MK 2, Cd539) Below we will describe the steps you need to follow in order to correctly replace the small button battery inside the key of your Ford Edge Mk2. Firs…
How do I replace the Ford Edge remote control battery?
How do I replace the Ford Edge remote control battery?
Ford Edge (2006-2014 / U387, MK 1) In order to replace the Ford Edge remote control battery, you need to pry into the groove that divides the two halves of the remote control, on the o…

Other guides you may be interested in

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos