Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford Edge

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

To replace the battery in the Ford Edge, start by opening the bonnet. Use an 8mm socket to undo the nut holding the lower battery clamp.

First, disconnect the negative terminal using a spanner, then the positive terminal with the same spanner. Pry the terminals up with a flathead screwdriver to lift them off; now you can remove the old battery.

Take the new battery and place it where the old one was. Reconnect the positive terminal (after cleaning it with a knife), then tighten it to the battery. Reconnect the negative terminal (also after cleaning it), then tighten it to the battery.

Finally, reattach the lower battery clamp with the 8mm socket. Now you can test the new battery.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Ford Edge?
How to Replace the Key Fob Battery on the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) To replace the battery in the key fob of the Ford Edge, leverage inside the groove that divides the two halves of the fob, on the side opposite to wh…
How to Replace the Battery in a Ford Edge
How to Replace the Battery in a Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) To replace the battery in a Ford Edge, open the bonnet to access the components inside the engine bay: the battery is located on the right-hand side,…
How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) To replace the battery of the Ford Edge remote, slide the lever on the back of the device to remove the key from the top. Once removed, lever inside …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos