Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the front passenger airbag on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Airbag

This video tutorial shows the steps to deactivate the front airbag on the passenger side. The required steps are very simple and do not require any special tools apart from the specific key. First, get into the car and open the dashboard door located at the bottom on the passenger side by lifting the appropriate lever; at this point, you will immediately see the slot to insert the key for deactivating the airbag, accompanied by the "on-off" label. Insert the key and turn it to the off position. To verify the success of the operation, simply turn on the car's instrument panel and check that the airbag indicator shows off.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To disable the passenger airbag on the Ford Fiesta, turn on the instrument panel so you can navigate the menu that will appear on the onboard compute…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, we can see how to deactivate the passenger airbag in the Ford Fiesta, an extremely simple and quick operation, to be carried out ne…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To disable the passenger airbag on a Ford Fiesta, open the glove compartment on the passenger side. Once the compartment is open, locate a red lock a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos