Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the coolant level on Ford F 350?

Model: Ford F-350 P473 - Years 2011-2016
Part: Checks and maintenance

The video present here helps us to identify which is the tank that contains the coolant inside the engine compartment of our Ford F 350. Once we have identified it, after opening the front hood, we can check if the level there is sufficient liquid (or, conversely, if it is excessive) using the two level notches located on one side of this tank. If the liquid is insufficient, we can top it up with new liquid. If, on the other hand, the tank is empty or with very little liquid, there is probably a leak in the tank or in the system.

Posted on 15 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to check transmission fluid on Ford F 350
How to check transmission fluid on Ford F 350
Ford F-350 (2008-2010 / P356) In this short video tutorial we are going to see how to check the transmission fluid on a Ford F 350, produced from 2008 to 2019. You can check it yo…
How to check the oil level in the Ford F-350 pickup?
How to check the oil level in the Ford F-350 pickup?
Ford F-350 (2017-2023 / P558) In this tutorial we can see how to check the engine oil level in the Ford F-350 pickup. This is a very simple operation to repeat regularly, in order…
Where are the fuses located in the Ford F250/350/450/550?
Where are the fuses located in the Ford F250/350/450/550?
Ford F-350 (2011-2016 / P473) The fuse boxes in the Ford F250/350/450/550 are located one in the engine compartment and one in the cabin; the one in the cabin is located under the…

Other guides you may be interested in

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos