Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seat lever on the Ford Fiesta 5

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Handle

In this video, you will see how to remove the reclining lever of the front seat on the Ford Fiesta fifth series, following these simple steps. First, open the front door and start by removing the plastic cover of the lever; to do this, pry on the sides with something thin, then remove the cable for the seat recline. At this point, replace the handle with the new one, inserting it correctly onto the support; connect the cable and secure the handle to the front seat, following the video tutorial to the end!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of a Ford Fiesta
How to Remove the Front Seat of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, open the front door of your Ford Fiesta. Begin by sliding the front seat fully back on its tracks. Next, unscrew the front bolts th…
How to Remove the Seat Lever on a Ford Fiesta
How to Remove the Seat Lever on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Removing and refitting the seat lever requires some skill and ability. As we see in the video, the first step is to understand how the lever is made …
How to Remove the Front Seat from the Ford Fiesta?
How to Remove the Front Seat from the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To remove the front seat from the Ford Fiesta, loosen the screws located at the front of the seat's sliding rails. To reach them, you may need to pus…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos