Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Original Radio from the Ford Explorer MK4

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Car stereo

In this video, you will see how to remove the original radio from the fourth series Ford Explorer in simple and quick steps. First, get inside the vehicle and start by removing the trim of the gear lever cover, prying the sides; then disconnect the connector at the back. At this point, remove the central cover of the console, then unscrew the screws of the radio; disconnect the electrical connectors found at the back, as illustrated in the video. For reassembly, simply apply the reverse procedure!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Explorer (2006-2010 / U251, MK 4) To remove the radio, start by removing the automatic gear console. Remove the retaining pins and then, using a plastic trim tool, detach the plastic …
Ford Explorer (2002-2005 / U152, MK 3) This guide shows how to remove the radio from the Ford Explorer Mk3. First, detach the finishing trim of the radio console using a trim removal tool.…
Ford Explorer (2006-2010 / U251, MK 4) This guide shows how to replace the front fog lights on the Ford Explorer Mk4. First, lift the vehicle and disconnect the power cable of the fog ligh…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos