Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Manufacturer's Badge on the Ford Fiesta MK5

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Manufacturer emblem

See other generations:
Video tutorial

In this video, learn how to remove and replace the manufacturer's badge or logo of the fifth series Ford Fiesta in simple and quick steps. First, open the rear hatch and start by removing the door panel, unscrewing the screws and prying at the edges; then remove the rear badge from the inside as shown in the video.

At this point, insert the new logo, ensuring it is applied perfectly and will not come off; then refit the rear hatch panel, applying the same procedure for replacing the front logo.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Ford Fiesta
Replacing the Air Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To keep your engine running efficiently and monitor fuel consumption, replace the air filter at the frequency specified in the Ford Fiesta maintenanc…
How to remove the front seat from a Ford Fiesta?
How to remove the front seat from a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To remove the front seat from a Ford Fiesta, loosen the bolts securing the seat to the sliding rails: these bolts are located both at the front and r…
Replacing Fuses on a Ford Fiesta
Replacing Fuses on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Replacing fuses on a Ford Fiesta? Enter the vehicle and open the glove compartment on the right dashboard. Release the end stop arms of the compartme…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos