Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror on the Ford Explorer MK3

Model: Ford Explorer U152, MK 3 - Years 2002-2005
Part: Side mirror

In today's video, learn how to remove and replace the external wing mirror on the third series Ford Explorer. First, open the front door and start by removing the door panel; to do this, unscrew all the screws found on the sides, as shown in the video. Now, remove the mirror cover and disconnect the electrical connector for the adjustment; then unscrew the fixing screws of the mirror, sliding it out from the outside. All that’s left is to replace it with the new one, securing it properly to the base and then adjusting it!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rear-view mirror on a Ford Explorer
How to replace the external rear-view mirror on a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) Today, in this brief and simple guide, you will see the steps to remove and replace the external rear-view mirror on a Ford Explorer. First, open the…
How to Replace the External Wing Mirror on the Ford Explorer
How to Replace the External Wing Mirror on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) The step-by-step instructions in this guide will allow you to remove and replace the external wing mirror on the Ford Explorer. First, open the front…
Replace the External Wing Mirror of the Ford Explorer 4
Replace the External Wing Mirror of the Ford Explorer 4
Ford Explorer (2006-2010 / U251, MK 4) Discover how to remove and replace the external wing mirror of the fourth series Ford Explorer by following these simple steps. First, remove the gla…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos