Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Reflector Lamp on the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

In this tutorial, you will see how to remove the small rear reflector lamp of the Ford Fiesta MK6. First, use a Torx key to remove the lower screw of the main lamp, then unlock the plastic clips of the wheel arch and undo the single bolt with a 10mm socket. Next, use an 8mm socket to undo the bumper fixing bolt, allowing you to slightly move it and gain some manoeuvring space. Continue by undoing the 2 Torx screws that fix the reflector lamp. Finally, extract the lamp and fit the replacement by following the procedure in reverse.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Want to remove the rear light of a Ford Fiesta but don't know how? Follow these steps: open the boot and, using a screwdriver, unscrew the securing n…
Replacing Stop Light on Ford Fiesta
Replacing Stop Light on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you remove the rear light on your car? Let's look at removing the rear light on a Ford Fiesta. Lift the car's tailgate and secure it. Remove t…
How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the rear light of a Ford Fiesta? This operation is very simple, follow these steps: open the boot lid, then remove the fabric cover loc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos