Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2009 Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Warning light – error code

Resetting the service light on a 2009 Ford Kuga is simple and takes less than a minute. First, turn off the car and the ignition. Once done, press the brake pedal and the accelerator pedal down simultaneously. While holding the accelerator and brake pedals, turn on the ignition and wait for 10 seconds. After 10 seconds, the message 'reset completed' will appear on the car's display. You can then release the brake and accelerator pedals and proceed to turn off and on the ignition to verify that the reset has been successful.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2017 Ford Kuga
How to Reset the Service Light on a 2017 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) This video tutorial shows the procedure to reset the service light on a 2017 Ford Kuga. The procedure is as follows: press and hold the brake and acc…
How to Reset the Tyre Light on a Ford Kuga
How to Reset the Tyre Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) To reset the tyre light on a Ford Kuga, first adjust your tyres and then begin the reset. Start the reset by turning on the instrument cluster and pr…
How to Reset the Service Light of the Ford Kuga
How to Reset the Service Light of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) To reset the service light related to the car service of the Ford Kuga, you need to follow simple and quick steps. The first step is to turn on the i…

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos