Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Spark plug replacement instructions

Ford Fiesta - Video tutorial

Model: Ford Fiesta Be91, Fiesta 4, MK 4, MK IV - Years 1996-2002
Part: Engine
Operation: Spark plug replacement instructions

To access the spark plugs, unscrew the fixing pins of the plastic cover on the engine head, remove the oil cap and then the cover in question; then extract the pipettes connected to the spark plugs but, before proceeding with the disassembly of the spark plugs, it is suggested to blow with compressed air to eliminate any residual dirt that could end up in the cylinders; after this, unscrew the spark plugs and install the new ones without exceeding the tightening torque; reposition the pipettes after cleaning them with electrical contact spray.


Posted on 7 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Fiesta 2008-2017 - What malfunction problems affect the Ford Fiesta engine? Read Answer
    • Fiesta 2008-2017 - Why is the temperature light on in the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - What's wrong with the Ford Fiesta 1.4 TDCI? Read Answer
    • Fiesta 2008-2017 - Why is the Ford Fiesta engine noisy? Read Answer
    • Fiesta 2008-2017 - Noise coming from the crankshaft pulley in Ford Fiesta TDCi, how come? Read Answer
    • Fiesta 2008-2017 - Why won't the Ford Fiesta engine start? Read Answer
    • Fiesta 2008-2017 - What does the engine light on in the Ford Fiesta mean? Read Answer
    • Fiesta 2008-2017 - How much is the engine of the Ford Fiesta 1.4 TDCi? Read Answer
    • Fiesta 2017-2023 - Why did the engine failure light on the Ford Fiesta come on? Read Answer
    • Fiesta 2002-2008 - High coolant temperature on Ford Fiesta, what to do? Read Answer
    • Fiesta 1996-2002 - About Ford Fiesta mk4? Read Answer
    • Fiesta 2008-2017 - How much does it cost to rebuild the engine of a Ford Fiesta? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos