Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Ford Flex?

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

Video tutorial

To replace the front brake pads on a Ford Flex, lift the vehicle with a jack or a lift so that the corresponding wheel is off the ground. Once the vehicle is raised, loosen the bolts securing the wheel, remove it completely, and access the components at the back.

Remove the brake caliper by disconnecting it from the rotor and extracting the pads inside. You can then insert the new pads, secure the caliper to the rotor, and reinstall the wheel.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Ford Flex?
How to Replace the Headlight Bulb on a Ford Flex?
Ford Flex (2009-2019 / MK 1) To replace the headlight bulb on a Ford Flex, open the hood to access the components inside the engine compartment. Specifically, disconnect the conn…
How to Replace the Air Filter in a Ford Flex?
How to Replace the Air Filter in a Ford Flex?
Ford Flex (2009-2019 / MK 1) Replacing the air filter in a Ford Flex is a very simple and quick task. First, wait for the engine to cool completely for safety. Then, open the hoo…
How to Replace the Key Battery in the Ford Flex
How to Replace the Key Battery in the Ford Flex
Ford Flex (2009-2019 / MK 1) In this new mini guide about the Ford Flex, we will discover how to replace the key battery. First, locate the small button on the bottom of the cove…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos