Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Gear Knob

Model: Ford Focus MK 1 - Years 1998-2004
Part: Shift knob

It is very easy to find aftermarket gear knobs with attractive designs and ergonomic shapes. The original knob is simply screwed onto the gear lever: to remove it, just unscrew it. The new knob will need to be secured using screws located at the bottom, which are then concealed by a collar. First, place the collar onto the gear lever, screw the plastic bush onto the thread of the lever, insert the new knob, align it correctly, and tighten the screws at the bottom to secure it; finally, apply the collar.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on the Ford Focus?
How to Replace the Gear Knob on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the gear knob on the Ford Focus, grip the knob and rotate it counterclockwise. This procedure will allow you to completely detach the old …
Replacement of the gear shift boot of the Ford Focus MK2
Replacement of the gear shift boot of the Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) The gear shift knob of the Ford Focus can deteriorate over time to the point where it needs to be replaced, taking the opportunity to install one wit…
How do you replace the gear knob of the Ford Focus?
How do you replace the gear knob of the Ford Focus?
Ford Focus (1998-2004 / MK 1) The replacement of the gear knob of the Ford Focus is done by holding the leather cover of the gear lever still: by keeping this cover still, you wil…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos