Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cabin air filter

This guide shows how to replace the cabin air filter in a Ford Fiesta Mk6. From the footwell of the front passenger seat, unscrew the plastic screw on the left side of the compartment. Detach the plastic panel and disconnect the blue electrical connector, setting it aside. Using a Torx T20 screwdriver, unscrew the three securing screws of the cabin air filter cover and remove the element. Slide out the old filter and remove any debris. Install the new filter, ensuring the correct orientation. Refit the cover and tighten it; reconnect the electrical connector and close the plastic panel.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Ford Fiesta 6
How to replace the air filter of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In the following procedure, we will describe all the steps you need to follow in order to successfully replace the engine air filter of your Ford Fie…
How to Replace the Cabin Filter on the Ford Fiesta 2011
How to Replace the Cabin Filter on the Ford Fiesta 2011
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Periodically replacing the cabin air filter inside your Ford Fiesta Mk6 (2011) is very important, especially if you want to avoid unpleasant odours w…
How to Replace the Air Filter on the Ford Fiesta MK6 1.4
How to Replace the Air Filter on the Ford Fiesta MK6 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, follow these instructions to remove and replace the engine air filter on the sixth generation Ford Fiesta with a 1.4 Zetec engine. First, open…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos