Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on a Ford Escape.

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the tire pressure light on a Ford Escape with an automatic transmission by following a few simple steps that will guide you through proper vehicle management without needing professional assistance. First, go to a tire shop to check the tire pressure and resolve any issues if necessary.

If the light remains on, get in the vehicle, press the brake pedal once, insert the key, and turn the ignition on and off three times. Press the brake pedal once again and repeat the same procedure with the key. Tire pressure reset completed.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on the Ford Escape?
How to Reset the Tire Pressure Light on the Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the tire pressure light on the Ford Escape, inflate the tires until they reach the correct pressure: you can find the exact pressure value o…
Reset the Tire Pressure Light on the Ford Escape MK3
Reset the Tire Pressure Light on the Ford Escape MK3
Ford Escape (2013-2019 / MK 3) In this video, learn how to reset the tire pressure light on the third generation Ford Escape. Before starting, ensure all four tires are at the corr…
How to Reset the Service Light on a Ford Escape?
How to Reset the Service Light on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the Service light on a Ford Escape, turn the ignition key in the ignition switch to the ON position to light up the instrument cluster. Once…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos