Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tire Pressure Light on the Ford Escape MK3

Model: Ford Escape MK 3 - Years 2013-2019
Part: Tire pressure warning light

In this video, learn how to reset the tire pressure light on the third generation Ford Escape. Before starting, ensure all four tires are at the correct operating pressure. Then, get in the vehicle and turn the ignition on, then off, repeating this process three times. Next, press the brake pedal for a couple of seconds, then turn the ignition off again and repeat the initial operation three times. At this point, repeat the cycle until the TPMS light resets on the instrument cluster, following the video to the end!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Ford Escape?
How do you reset the tire pressure light on the Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the tire pressure warning light on the Ford Escape, you need to inflate the car's tires until they are brought back to the correct pressure …
Reset of the tire pressure warning light for the Ford Escape.
Reset of the tire pressure warning light for the Ford Escape.
Ford Escape (2020-2026 / MK 4) Today we will discover how to reset the tire pressure warning for the Ford Escape, as well as the Ford Kuga. Before resetting the TPMS sensors, it is…
How to Reset the Tire Pressure Light on a Ford Escape.
How to Reset the Tire Pressure Light on a Ford Escape.
Ford Escape (2013-2019 / MK 3) In this video tutorial, you can see how to reset the tire pressure light on a Ford Escape with an automatic transmission by following a few simple st…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos