Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Indicator Bulbs on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Side marker bulb

In today’s tutorial, learn how to disassemble and replace the side indicator bulbs on the external mirror of a Ford Kuga. First, open the front door and start by removing the glass from the mirror by disconnecting the connector at the back; then, remove the plastic cover and lever the sides of the indicator housing until it is completely removed, as shown in the video. At this point, replace the bulb with a new one, or replace the entire unit; then reassemble everything by following the reverse procedure!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side indicator bulbs of the Ford Kuga
How to replace the side indicator bulbs of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the bulbs for the side indicators of the Ford Kuga model 2 is an easy and quick operation to do independently. We start by removing the cov…
How to replace the rear turn signal bulbs of the Ford Kuga 2
How to replace the rear turn signal bulbs of the Ford Kuga 2
Ford Kuga (2012-2019 / C520, MK 2) The steps to replace the side turn signal bulbs of the Ford Kuga 2 are: - open the trunk; - remove the screw protection caps; - unscrew the two screw…
Replacing the Indicator Bulb of the Ford Kuga 2 Wing Mirror
Replacing the Indicator Bulb of the Ford Kuga 2 Wing Mirror
Ford Kuga (2012-2019 / C520, MK 2) In today's tutorial, you will learn how to remove and replace the indicator bulb of the external wing mirror of the second generation Ford Kuga. Firs…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos