Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Ford Tourneo

Model: Ford Tourneo MK 2 - Years 2013-2024
Part: Warning light – error code

In this tutorial, see how to reset the service light on a Ford Tourneo, a very simple and quick operation to perform only after completing all required maintenance tasks. Start by inserting the key, then press the accelerator pedal all the way down while simultaneously turning on the ignition. At this point, you will notice a message on the display indicating that the reset is in progress; just keep the accelerator pressed until the operation is complete. To verify that the procedure was successful, restart the ignition.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Tourneo (2013-2024 / MK 2) In this tutorial, you will see how to reset the service on the Ford Tourneo Connect van, a very simple and quick operation to perform only after comp…
Ford Tourneo (2013-2024 / MK 2) In a few simple steps, we will see how to reset the tire pressure light on the Ford Tourneo; before resetting the TPMS sensors, it is necessary that …
Ford Tourneo (2013-2024 / MK 2) In this tutorial, we can see how to reset the service in the Ford Tourneo van, an extremely simple and quick operation, to be carried out only once a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos