Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this brief tutorial, you will learn how to replace the battery on a Ford Focus mk3, produced from 2011 to 2018. To begin, open the bonnet; the battery is located at the top right. Lift the first battery cover to unclip and remove it, then use a 10mm socket to remove the battery bar and subsequently the second rear cover.

Next, using a 10mm socket, first unscrew the negative terminal and then the positive terminal. Finally, remove the windscreen frame using the appropriate fastening tab, and once all this is done, you can remove the old battery and replace it with a new one by following the procedure in reverse.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford Focus
How to Replace the Key Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by inserting a thin but sturdy tool into the slot on the side of your Ford Focus key to pry it open. Next, you will need to unclip and remove t…
How to replace the battery on a Ford Focus 1.5 TDCi?
How to replace the battery on a Ford Focus 1.5 TDCi?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the battery on a Ford Focus, open the bonnet and remove any obstructing parts that prevent access to the battery, such as the air filter b…
How to Replace the Car Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the battery on a Ford Focus? Let's look at removing the old battery located in the engine bay. Open and lift the front bonnet by releasing …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos