Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Indicator Control Lever Replacement

Model: Ford Focus MK 1 - Years 1998-2004
Part: Dashboard

Replacing the indicator control levers is extremely simple as they are simply clipped in place: start by opening the covers of the indicator unit to access the control levers; once the upper cover is lifted, press the retaining tab of the indicator control lever and pull it upwards to remove it from its seat and disconnect the corresponding power connector. Repeat the same procedure to replace the wiper control lever. Once the new levers are inserted, ensure that the retaining tab clicks into place.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard Disassembly Instructions
Dashboard Disassembly Instructions
Ford Focus (1998-2004 / MK 1) Disassembling the dashboard is a time-consuming task that requires a lot of patience since there are many components to remove in a specific sequence…
Guide to Replacing the Climate Control Switches on the Ford Focus
Guide to Replacing the Climate Control Switches on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) These brief and simple steps will show you how to dismantle and replace the climate control switches on the Ford Focus. First, get inside the vehicle…
Replacing the External Rear-View Mirror
Replacing the External Rear-View Mirror
Ford Focus (1998-2004 / MK 1) Replacing the external rear-view mirror is very simple to carry out and does not require special tools or the removal of the door panel: it is suffic…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos