Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the Ford Focus mirror arrow bulb

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side marker bulb

Let's find out in this short guide the main steps to remove and replace the Ford Focus exterior mirror arrow bulb. First we are going to remove the external plastic mirror cover, using a screwdriver and a thin plastic lever; then we go to unhook the small light of the arrow, disconnecting the electrical connector of the light bulb to remove it from the light, as shown in the video. At this point we correctly insert the new bulb on the socket, then reassemble the arrow and the mirror!

Posted on 6 November 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
Ford Focus (2004-2011 / Focus 2, MK 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…
How to replace the Ford Focus front indicator light bulb?
How to replace the Ford Focus front indicator light bulb?
Ford Focus (1998-2004 / MK 1) In order to replace the Ford Focus front indicator light bulb, you need to lift the car using a jack or a bridge. In this way it will be possible to …
Change the rear light bulb Ford Focus 2016
Change the rear light bulb Ford Focus 2016
Ford Focus (2011-2018 / MK 3) How to change the rear light bulb on a Ford Focus? Let's see how the rear light is removed from inside the car body. We open the bonnet of the luggag…

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos