Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to reset the BMS on a Ford Focus MK3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Instrument cluster
Operation: How to reset the BMS on a Ford Focus MK3

On Ford cars, the BMS is the battery management system, which monitors the condition of the battery and intervenes to extend its life, if necessary, by disabling some electrical functions. This system must be reset every time the battery is changed, or if a power supply is used to recharge the existing battery. In fact, the system will remember that the battery is flat. The problem can be avoided by leaving the vehicle off for at least eight hours or by resetting it; in any case the vehicle must have been switched off for at least 30 minutes. Put the key in the ON position and wait for the battery light to flash at least 5 times; press and release the brake 3 times. After 5/10 seconds the light should go off. This may need to be done again, but you must let the system cool down for 30 minutes.


Posted on 29 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2018-2025 - What orange keys does the Ford Focus have? Read Answer
    • Focus 2011-2018 - What does the red engine warning light on the Ford Focus indicate? Read Answer
    • Focus 2004-2011 - Why is the dashboard of the Ford Focus 2 not working? Read Answer
    • Focus 2004-2011 - What does the ESP light on the Ford Focus 2 indicate? Read Answer
    • Focus 2018-2025 - Where is the rail sensor located on the Ford Focus? Read Answer
    • Focus 2011-2018 - What features does the Ford Focus RS have? Read Answer
    • Focus 2018-2025 - What to do when the yellow engine malfunction light comes on in a Ford Focus? Read Answer
    • Focus 2004-2011 - Why has the instrument cluster in Ford Focus stopped working? Read Answer
    • Focus 2011-2018 - Why is the Ford Focus instrument cluster not working? Read Answer
    • Focus 2011-2018 - What does the yellow engine light on the Ford Focus indicate? Read Answer
    • Focus 2011-2018 - How do you access the secret menu of the Ford Focus 3? Read Answer
    • Focus 2018-2025 - What does it mean when the engine malfunction light turns on in a Ford Focus? Read Answer
    • Focus 2011-2018 - What does the Ford Focus red engine light mean? Read Answer
    • Focus 2011-2018 - What to do if Ford Focus won't start due to stuck immobiliser? Read Answer
    • Focus 2004-2011 - What problem could the Ford Focus instrument cluster present? Read Answer
    • Focus 1998-2004 - How to adjust the on-board computer in Ford Focus? Read Answer
    • Focus 2011-2018 - Why has my Ford Focus instrument cluster stopped working? Read Answer
    • Focus 2004-2011 - What problems does the Ford Focus instrument cluster have? Read Answer
    • Focus 2011-2018 - What to do if the Ford Focus engine warning light comes on? Read Answer
    • Focus 2004-2011 - Why does the Ford Focus 2 ignition not light up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos