Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Lights on the Doors of Ford Cars

Model: Ford Ford Various
Part: Body

Video tutorial

Let's see how to add courtesy lights that project the Ford logo onto our vehicle. We found them on eBay for £10.50 each, including shipping.

No drilling or wiring is needed, just three AAA batteries for each unit. The package also includes double-sided tape to attach the unit to the door, so no additional materials are required for installation, along with batteries that you should have already charged.

The best place to mount them is on the outer edge of the door, as the trim is more protruding than the rest of the door, providing the widest area. Clean it thoroughly and mount the unit.

Remember that the two projectors have a left and a right; otherwise, they will project the logo upside down. Once you are sure of the mounting direction, you can install them directly.

Then place the sensor on the threshold and the operation is complete. You can move to the other side.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Reset the Battery Module Detection on a Ford Vehicle
How to Reset the Battery Module Detection on a Ford Vehicle
Ford Ford Various Let's see how to reset the battery module detection via the BMS (Battery Monitoring System). The engine must be off, the key in the ignition in the "…
How to Reset the Battery Warning Light on Ford Cars?
How to Reset the Battery Warning Light on Ford Cars?
Ford Ford Various On Ford vehicles, there is a manual procedure to reset the battery warning light that illuminates on the dashboard. First, switch on the ignition. Th…
How to Fix a Small Problem with Central Locking on Ford and Fiat Remotes
How to Fix a Small Problem with Central Locking on Ford and Fiat Remotes
Ford Ford Various In this video, you will learn how to fix a small issue that can occur with Ford and Fiat remotes, where the metal contacts may shift and fail to make…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos