Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Battery Warning Light on Ford Cars?

Model: Ford Ford Various
Part: Warning light – error code

Video tutorial

On Ford vehicles, there is a manual procedure to reset the battery warning light that illuminates on the dashboard. First, switch on the ignition.

Then, flash the main beam five times. After this, press the brake pedal fully three times.

Once these steps are completed, wait a few seconds and observe the warning light, which should turn off. At this point, you can switch off the ignition.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Ford Ford Various The Powershift automatic transmission, installed on Ford cars, may suddenly not respond to commands, preventing the use of the vehicle. There is no n…
Ford Ford Various This video demonstrates how to disable the passenger airbag on Ford vehicles, which is necessary when transporting children in the front seat. By law…
Ford Ford Various To reset the service light related to car maintenance on a Ford Everest vehicle produced from 2016 to 2021, first turn on the instrument panel and si…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos