Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Everest

Model: Ford Ford Various
Part: Service warning light

To reset the service light related to car maintenance on a Ford Everest vehicle produced from 2016 to 2021, first turn on the instrument panel and simultaneously press the brake and accelerator pedals. Keeping both pedals pressed for about 15 seconds will initiate and complete the procedure to update the mileage for the next service. Once the procedure is complete, restart the instrument panel. If the light does not reset, it will be necessary to go to an authorised workshop for a computer diagnosis and UBD connection.

Posted on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Ford Everest?
How to Replace the Remote Battery in a Ford Everest?
Ford Ford Various Replacing the remote battery in a Ford Everest is an extremely simple and quick operation, let’s see how to proceed in this tutorial. For this, you w…
How to Remove the Tailgate Panel in a Ford Everest?
How to Remove the Tailgate Panel in a Ford Everest?
Ford Ford Various As you can see in this tutorial, removing the tailgate panel in a Ford Everest is an extremely simple and quick operation. Start by opening the boot …
How to Replace the Key Battery on the Ford Everest
How to Replace the Key Battery on the Ford Everest
Ford Ford Various If the battery in your Ford Everest key is flat, you will need to replace it. This guide provides important tips to carry out the operation safely an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos