Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from a Ford Fiesta 6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

In this short video tutorial, see the steps necessary to remove the radio from a sixth-generation Ford Fiesta, produced from 2008 to 2017. Using a plastic lever, first remove the lower panel, then the upper panel of the radio by detaching them from their clips. Once done, unscrew the screws holding the radio in place located above it. After removing them, using the lever again, start to extract the radio from its housing. Finally, to remove it completely, disconnect the relevant wiring.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat from a Ford Fiesta?
How to remove the front seat from a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To remove the front seat from a Ford Fiesta, loosen the bolts securing the seat to the sliding rails: these bolts are located both at the front and r…
How to remove the passenger glove box drawer of the Ford Fiesta
How to remove the passenger glove box drawer of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today we will explain how to remove the passenger glove box drawer on a Ford Fiesta mk7 model car. First, we open the glove box drawer and after remo…
Removing Centre Console on Ford Fiesta
Removing Centre Console on Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To carry out this operation, you need a plastic trim tool to pry in the various gaps and remove the panels. Start from the upper area of the centre c…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos