Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Key

In this tutorial, see how to replace the battery in the Ford Fiesta key fob, an extremely simple and quick operation. You will need a replacement battery of type CR2032 and a small flathead screwdriver. First, open the rear cover by pressing both upper sides, then remove the emergency metal key, insert the screwdriver into the indicated slot, and lever it to unlock the two halves of the fob. Once done, remove the old battery, place the replacement in the correct orientation, and reassemble everything.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Ford Fiesta
How to Replace the Remote Battery in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract t…
Replacing Key Fob Battery on Ford Fiesta
Replacing Key Fob Battery on Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, see how to disassemble and replace the battery of the key fob for a Ford Fiesta MK8 by following these steps. First, take the key fob …
How to Replace the Remote Battery of a Ford Fiesta?
How to Replace the Remote Battery of a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the remote battery of a Ford Fiesta, use a tool like a screwdriver to lever open the slot above the manufacturer's logo: this will allow y…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos