Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Central Display in the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Car stereo

The following steps will guide you through removing and replacing the central display and installing a new Android multimedia system in the Ford Ecosport. First, get inside the vehicle and start by removing the plastic cover above the display; then remove the cover of the central instrument panel, as shown in the video. At this point, unscrew the bolts of the central unit, disconnecting the electrical wiring found at the back; remove the display and install the new Android unit, following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Central Display on a Ford Ecosport
How to Replace the Central Display on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) To replace the central display on a Ford Ecosport, use a tool like a screwdriver to pry off the cover surrounding the central screen and the underlyi…
How do you set the clock of the Ford Ecosport?
How do you set the clock of the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) The clock adjustment of the Ford Ecosport is done by turning on the instrument panel, after the ignition key has been inserted into the corresponding…
How to Remove the Radio Display of a Ford Ecosport
How to Remove the Radio Display of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, sit in the driver's seat of your Ford Ecosport. Begin by prising off and removing the radio display frame using a thin but sturdy to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos