Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Guide to removing the rearview mirror

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Outside rearview mirror
Operation: Guide to removing the rearview mirror

Broken mirror? Does the scooter no longer work? Here are a few simple steps to replace it! Disassembly starts from the inside of the door. We remove the interlocking plastic where the mirror adjustment knob is located, detach the connector, and unscrew the bolt with a wrench. At this point we carefully extract the entire mirror, making sure to pass the connector through the slot, to install the new mirror, simply insert it into its housing, screw the bolt back on, and fit the plastic back into place where the regulator is housed. mirror position.


Posted on 22 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos