Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Gear Knob and Gaiter on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

Today, we will look at the instructions for removing and replacing the gear knob and gaiter on a Ford Focus. First, get into the vehicle and start by detaching the cover of the gear gaiter found at the base by prying at the sides; then lift the gaiter and detach the clip located between it and the gear knob, as shown in the video.

At this point, pull the knob upwards to detach and remove it, replacing it with the new one; secure it properly on the lever and also refit the gear gaiter with the cover.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) On the Ford Focus 2, replacing the gear knob is very straightforward. First, pull the gaiter off the base by hand (if difficult, use a plastic wedge)…
How to Replace the Gear Knob on the Ford Focus?
How to Replace the Gear Knob on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the gear knob on the Ford Focus, grip the knob and rotate it counterclockwise. This procedure will allow you to completely detach the old …
Guide to Replacing the Ignition Cylinder on the Ford Focus
Guide to Replacing the Ignition Cylinder on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's guide will show you how to remove and replace the ignition cylinder on the Ford Focus, following the instructions below. First, get inside th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos