Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Door Panel

Model: Ford Focus MK 1 - Years 1998-2004
Part: Door trim panel

In the world of DIY, it is important to follow a guide with precise instructions, especially when performing small repairs on your car. The following guide shows the procedure to correctly remove the door panel of your car. First, locate the three screws on the panel and remove them. Then, detach the aluminium trim from the door. Next, move to the bottom of the structure and perform the final step before removal: take out the support screw located in the centre of the panel and proceed to detach the entire assembly.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Outer Door Handle on a Ford Focus
Replacing the Outer Door Handle on a Ford Focus
Ford Focus (1998-2004 / MK 1) Briefly, we will see the steps to remove and replace the outer door handle on the front door of a Ford Focus. First, open the front door of the vehic…
How to Change the Door Panel on Ford Focus
How to Change the Door Panel on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Replacing the door panel on a Ford Focus, let's see how to remove and change it. Disconnect the battery terminals located in the engine bay. Remove t…
Removing the Door Panel on a Ford Focus
Removing the Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Is the door panel damaged? Want to remove it yourself? Start by taking off the cover of the inner handle, then detach the internal pieces of the door…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos