Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan from the Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Blower motor

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the cabin fan of the Ford Focus. First, get inside the vehicle on the front passenger side and open the glove compartment; unscrew the screws located at the top to detach and remove it, as shown in the video.

Next, unscrew the screws of the cabin fan found on the sides; disconnect its electrical connector to remove it and replace it with the new one, reconnecting it and testing its operation!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …
Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Guide to Removing the Cylinder Head on a Ford Focus
Guide to Removing the Cylinder Head on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today's main instructions will show you how to remove and replace the engine cylinder head on a Ford Focus. First, lift the vehicle and start by remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos