Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mustang
  6. : Repair bumper fixing rib

Ford Mustang - Video tutorial

Model: Ford Mustang MK 4 - Years 1994-2004
Part: Bodywork
Operation: Repair bumper fixing rib

If it happens that one of the fixing ribs of the bumper to the mudguard detaches during disassembly, it can be remedied by gluing the rib laid out following a specific procedure which requires the use of a particular glue; start by carefully cleaning and degreasing the edges to be glued; sand with coarse sandpaper and remove any shavings with a cutter; apply a reinforcing metal mesh fixing it to both edges with a soldering iron; apply aluminum tape on the underside and melt the particular glue always with the welder; once the joint has cooled, remove the tape and shape it with sandpaper.


Posted on 22 August 2023 by ScegliAuto



Rear bumper removal instructions
Ford Mustang (2005-2014 / MK 5, S197) In order to disassemble the rear bumper, first remove the plastic coating inside the rear luggage compartment in order to access the fixing pins of t
Front bumper removal instructions
Ford Mustang (2005-2014 / MK 5, S197) Start by opening the front bonnet and remove the eight pressure fasteners securing the plastic cover of the bonnet grille (extract the central pin an
Starter motor replacement
Ford Mustang (2005-2014 / MK 5, S197) Before proceeding with the removal of the starter motor, disconnect the negative pole of the battery. The starter motor is located in the lower part

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos