Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Mustang
  6. : Front bumper removal instructions

Ford Mustang - Video tutorial

Model: Ford Mustang MK 5, S197 - Years 2005-2014
Part: Front bumper
Operation: Front bumper removal instructions

Start by opening the front bonnet and remove the eight pressure fasteners securing the plastic cover of the bonnet grille (extract the central pin and then the catch); once the cover has been removed, unscrew the fixing screws from the upper edge of the bumper, first removing the central screw and placing the relative rubber pad and then unscrewing the pins immediately alongside. Proceed with removing the screws along the edge of the wheel arch and the lower edge where the plastic covering must also be removed in order to access the arrow and temperature sensor sockets. Finally unclip the side edges under the fenders and pull the bumper forwards.


Posted on 30 July 2023 by ScegliAuto



Rear bumper removal instructions
Ford Mustang (2005-2014 / MK 5, S197) In order to disassemble the rear bumper, first remove the plastic coating inside the rear luggage compartment in order to access the fixing pins of t
Repair bumper fixing rib
Ford Mustang (1994-2004 / MK 4) If it happens that one of the fixing ribs of the bumper to the mudguard detaches during disassembly, it can be remedied by gluing the rib laid out fo
A / C condenser replacement instructions
Ford Mustang (2005-2014 / MK 5, S197) Before lifting the car on the lift, open the coolant reservoir cap to allow the liquid to drain; then remove the lower plastic protections and unscre

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos