Do it yourself
Frequently asked questions about cars and motorcycles

Car Clutch Disassembly

Model: Ford Mustang S197, MK 5 - Years 2005-2014
Part: Clutch

The following guide explains the correct steps necessary for proper clutch disassembly. Start by removing the front wheels as the components of the gearbox are located at the front of the car. Once the wheels are off, proceed to disassemble the shock absorbers, taking care during this phase of disassembly. You will then need to disconnect the starter motor to prevent any fire risk. Following this, perform minor tasks such as draining the used gearbox oil, removing the gear lever, disconnecting it, and removing the clutch cable. Finally, remove the clutch disc and pressure plate from the flywheel by unscrewing the nuts that connect these two parts, allowing you to remove the clutch disc.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Mustang (2015-2023 / MK 6, S550) Start by pressing and holding the button located on the top side of the key for your Ford Mustang, then remove the back cover of the key. Next, extra…
Ford Mustang (2005-2014 / S197, MK 5) Before lifting the vehicle on the ramp, open the cap of the coolant reservoir to allow the fluid to drain; then remove the lower plastic protections …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos