Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

In this video tutorial, see how to replace the battery in a Ford Fiesta. First, get inside the vehicle, engage the handbrake, and pull the bonnet release lever to open it. Lift the bonnet and secure it with the prop rod; the battery is located on the right side of the engine bay. The required tools are a socket wrench with an extension and a 10 mm socket.

Start by disconnecting the negative terminal first, as the entire car is connected to the negative terminal, which could cause sparks. Next, disconnect the positive terminal by lifting the red plastic cover.

Using a 10 mm socket, remove the three nuts securing the battery protection cover. Once the cover is removed, slide off the front protection of the compartment.

At this point, you can pull the battery out of its housing and replace it with a new one.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the battery of the Ford Fiesta, use a tool to pry off the cover on the back of the remote, allowing you to remove the emergency key inside…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In the following guide aimed at all of you who own a Ford Fiesta Mk6, we will discover the steps you need to take if you intend to replace the vehicl…
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the remote battery in a Ford Fiesta, use a screwdriver to pry open the lower part of the device, detaching the rear cover of the key: once…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos