Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Bulbs of the Ford B-Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Interior dome light bulb

In today's video, you will see how to replace the interior lights of the Ford B-Max. Obtain a flathead screwdriver and proceed to unclip the ceiling light, taking care to disengage the unit. Once removed, disconnect the power connectors. You can now proceed with the ceiling light, extracting the bulbs from it. Replace them with bulbs of the same type or, if preferred, install LED bulbs. Once done, you can reinsert the ceiling light into its housing; then connect the power connector and test if it works before proceeding.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How to Remove the Rear Light on B Max
How to Remove the Rear Light on B Max
Ford B Max (2012-2018 / MK 1) Remove the rear light on the B Max to replace it or change blown bulbs. Here’s how to disassemble it. Open the boot lid, then remove the plastic cap …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos