Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Ford Figo

Model: Ford Figo MK 2, B562 - Years 2015-2021
Part: Battery

If you need to replace a burnt-out headlight bulb on this vehicle, you can find the instructions and information in this description and in the video. First, open the hood and locate the headlight assembly where the bulb needs to be replaced. Then, disconnect the electrical connector located at the back and remove the rubber cap. Next, detach the bulb holder and pull it out of its socket, then take the new bulb and position it, being careful not to touch the bulb with your fingers. Reattach the bulb holder, replace the rubber cover, and finally reconnect the electrical connector.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of the Ford Figo?
How to Remove the Rear Headlight of the Ford Figo?
Ford Figo (2015-2021 / MK 2, B562) Removing the rear headlight of the Ford Figo is not difficult, and you can do it independently without needing to go to a mechanic. First, open the t…
How to Replace the Third Brake Light Bulb in a Ford Figo?
How to Replace the Third Brake Light Bulb in a Ford Figo?
Ford Figo (2010-2015 / MK 1, B517) As we can see in this tutorial, replacing the third brake light bulb in a Ford Figo is an extremely simple and quick operation. Before proceeding, en…
Where is the fuse box of the Ford Figo located?
Where is the fuse box of the Ford Figo located?
Ford Figo (2015-2021 / MK 2, B562) Today we will explain how to access the fuse box of the Ford Figo, located in the front hood. To check the fuses inside the box, we need to open the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos