Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Bars on a Ford C Max?

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

See other generations:
Video tutorial

This video demonstrates the procedure for installing Green Valley roof bars on a Ford C Max. Take the first bar and insert the brackets at both ends, securing them by tightening the screws with an Allen key. Repeat this process with the other bar. Once done, open the front doors of the car and start the actual installation.

Adjust the distance between the two brackets and secure them in position.

Repeat the same operation with the other bracket, this time working at the rear doors. Finally, cover the screws of the brackets with the provided plastic panel.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Fitting Roof Bars on a Ford C-Max
Fitting Roof Bars on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Today, you will learn how to fit generic roof bars on a Ford C-Max from 2010 onwards; there are various types of bars available, each with different …
Where are the fuses located in the Ford C-Max?
Where are the fuses located in the Ford C-Max?
Ford C Max (2003-2010 / MK 1) On board the Ford C-Max, the fuses are divided within the dedicated fuse boxes installed in the vehicle: in this type of vehicle, you will find two b…
Where are the fuses located in the Ford C-Max?
Ford C Max (2010-2019 / MK 2) The fuses in the Ford C-Max are divided among three fuse boxes installed within the vehicle: the first box is located behind the glove compartment on…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos