Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Switch on the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the external lights switch on the Ford Fiesta, a very simple and quick operation. You will need a small flat screwdriver or, to avoid damaging the dashboard, a plastic spatula.

Simply insert the spatula into the joint of the switch, precisely in the areas where the retaining clips are located, lever it out, and disengage it from the housing. Once done, extract the entire block, disconnect the rear connector, and fit the replacement.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Stalk Switch on the Ford Fiesta
How to Replace the Stalk Switch on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this guide, discover how to remove and replace the stalk switch or headlight switch on the Ford Fiesta by following these simple and quick steps. …
How to Replace the Headlight Switch on the Ford Fiesta
How to Replace the Headlight Switch on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this guide, you will see the steps to disassemble and replace the headlight switch (or indicator stalk) on the Ford Fiesta. First, get inside the …
How to replace the front headlight on the Ford Fiesta?
How to replace the front headlight on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the front headlight on the Ford Fiesta, open the bonnet and loosen the screws located at the top of the headlight on its supports. Once th…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos