Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Warning light – error code

To reset the service indicator on a Ford Focus, follow these steps: First, turn on the ignition without starting the engine. Press the accelerator and brake pedals simultaneously for 20 seconds until the message 'service reset completed' appears on the display. At this point, you can switch off and then back on the ignition to verify that the reset has been successful. This is not a complicated procedure; it takes little time and requires no tools. The entire process takes 1 to 2 minutes.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the auxiliary belt on a Ford Focus
How to replace the auxiliary belt on a Ford Focus
Ford Focus (1998-2004 / MK 1) In this video, you will learn how to replace the auxiliary belt on the first series Ford Focus (this tutorial also applies to the second series Focus…
How to replace the power steering pump of the Ford Focus
How to replace the power steering pump of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The main institutions mentioned in this guide will explain the procedure for disassembling and replacing the hydraulic power steering pump of the For…
How to Replace the Power Steering Pump on a Ford Focus 2.0L
How to Replace the Power Steering Pump on a Ford Focus 2.0L
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show you the procedure for removing and replacing the hydraulic power steering pump on a Ford Focus 2.0L. First, open the bon…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - How to find the radio code of the Ford Focus 6000 CD? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos