Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located in the engine compartment, just below the windscreen, towards the passenger side; to access the filter housing, open the front bonnet, remove the plastic cover grille directly beneath the windscreen, and also take off the metal plate that acts as protection; once you reach the filter housing, slide the filter to the right to extract it along with its support frame; then remove the old filter from the frame and insert the new one (activated carbon filters are recommended).


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Galaxy (2006-2015 / MK 2) Remove the cover under the dashboard by taking out two clips, and by rotating a plastic butterfly, lower a circuit that will not concern us. You will…
How to Replace the Remote Battery on the Ford Galaxy
How to Replace the Remote Battery on the Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) This video tutorial shows the procedure for replacing the battery in the key/remote of the Ford Galaxy. The required battery is a CR2032, and it shou…
Replacing the Air Supply Hose in a Ford Galaxy
Replacing the Air Supply Hose in a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) In this descriptive video, see how to replace the air supply hose that runs from the intercooler to the intake manifold in a Ford Galaxy 2000 TDI. In…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos