Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

Remove the cover under the dashboard by taking out two clips, and by rotating a plastic butterfly, lower a circuit that will not concern us. You will see that the filter is located behind a black plastic grille. By removing the bolts, you can take out this grille, placing yourself in a slightly awkward position as you will see in the video.

Once the grille is removed, you can take out the filter and pay close attention to the direction in which you extracted it, as this will be the same position for the new one to ensure proper airflow direction. Now close everything up as it was and you're done!


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Ford Galaxy (2006-2015 / MK 2) The cabin air filter is located in the engine compartment, just below the windscreen, towards the passenger side; to access the filter housing, open …
How to Replace Air Filter on Ford Galaxy
How to Replace Air Filter on Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Replace the air filter of a Ford Galaxy if you have reached the mileage indicated in the workshop manual. Open the car door, pull up the engine compa…
How to replace the air filter in a Ford Galaxy.
How to replace the air filter in a Ford Galaxy.
Ford Galaxy (1995-2006 / MK 1) In this video tutorial, you can see how to replace the air filter in a Ford Galaxy, following a few simple steps: the first thing to do is to purchas…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos